EasyManua.ls Logo

Gorgy Timing LEDI Network IN - Appendix E - Data; Measurements; Specifications; Autres Spécifications

Gorgy Timing LEDI Network IN
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
110
MDE-LEDI-NETWORK-IN-4065V1.0
1. MEASUREMENTS
The rack is a standard 19” 1U rack. Here are its dimensions:
2. SPECIFICATIONS
Power requirement
230 V AC
Maximum: 0,1 A max.
Typical : 20 mA plus 2mA per output
115V AC
Maximum : 0,2 A max.
Typique : 40 mA plus 4mA per output
18-72V DC
Maximum : 0,6-0,15 A max.
Typical : 250mA plus 25 mA per output (18V)
62mA plus 7 mA per output (72V)
Environmental
Operating Temperature : 5 to 50°C (41 to 122°F)
Storage Temperature : -40 to 70°C (-40 to 151°F)
Electrical autonomy 4 hours on internal battery
3. AUTRES SPÉCIFICATIONS
Protocols supported
ARP, UDP, TCP, Telnet, ICMP, SNMP, DHCP, TFTP, HTTP,
ENDMI, AutoIP, JAVA, NTP, UDP TIME & TCP TIME
Network interface 110Base-T with RJ-45 interface
Management SNMP, WEB server, Telnet, ENDMI
Upgrade Possible through a TFTP server
Memory ROM:512K, RAM:128K, EEPROM:2K
APPENDIX E – DATA
1U = 44 mm
424 mm
263 mm
482 mm

Table of Contents