Gossen MetraWatt SECUTEST PRO Manual

GMC-I Messtechnik GmbH 11
Figure 3: Device Settings, Submenu Level – SETUP Switch Setting
Note
The test instrument must be restarted after changing the lan-
guage, the keyboard layout and the measuring sequences.
Database structure and content remain unchanged.
Manual selection for language and keyboard layout
Select language for user interface
Country-specific keyboard layout
Select language for test sequences
Jump back to next higher menu level
To parameter for default values
Menu selection for date, volume and brightness
Date and time setting menu
Volume setting menu
Brightness setting menu for LCD
Reset to default values
To parameters
Default Settings
Self-test for display and buzzer
Jump back to next higher menu level
Move cursor left
Set Time and Date Menu
Move cursor right
Increase number
Decrease number
Accept changes and jump back
(see settings menu below)
Setup 2/3 > Culture
Setup 1/3 > System 1/2
Setup 1/3 > System 2/2 > Default Settings
Setup 1/3 > System 1/2 > Date / Time
Page 2/2: Info on date format,
messages, user interface, measurements
for USB or touch-screen keyboard
With SECUTEST PRO only (feature E01):
calibrate touch-screen keyboard
decimal separator
PRINT
ESC
HELP
MEM
PRINT
ESC
HELP
MEM
PRINT
ESC
HELP
MEM
PRINT
ESC
HELP
MEM
CAUTION ! The setup configurations
and measured values is preserved.)
are deleted! (The database including structure

Gossen MetraWatt SECUTEST PRO Specifications

General

Brand	Gossen MetraWatt
Model	SECUTEST PRO
Category	Measuring Instruments
Language	English