Gossen MetraWatt SECUTEST PRO Manual

GMC-I Messtechnik GmbH 5
1 Applications
1.1 Table: Types of DUTs – Tests – Standards
Attention!
!
The test instrument may not be used for measurements
within electrical systems!
1.2 Table: Single Measurements and Regulations
Key
• Specified test
Testing after Repairs
/ Periodic Testing
DUTs
in accordance with
the following
standards
DIN EN 62638, draft DIN VDE 0701-0702 IEC 62353:2007 DIN EN 62353:2008 (VDE 0751-1) IEC 60974-4:2010 DIN EN 60974-4:2011 VDE 0544-4:2011
Electric devices •
Work devices •
Mains operated electronic devices •
Hand-held electric tools •
Extension cords •
Household appliances •
Data processing devices •
Electrical medical
devices, applied parts
•
Welding units •
Single measurements
per regulation
DIN EN 62638, draft DIN VDE 0701-0702:2008 IEC 62353:2007 DIN EN 62353:2008 (VDE 0751-1) IEC 60974-4:2010 DIN EN 60974-4:2011 VDE 0544-4:2011
Protective conductor resistance •••
Insulation resistance •••
Protective conductor current •
Primary leakage current •
Device leakage current •
Touch current ••
Current from welding circuits •
Patient leakage current •
Leakage current from the applied part •
Test methods
Alternative measurement method Equivalent (device)
leakage current)
••
Differential current measuring method •••
Direct measuring method •••

Gossen MetraWatt SECUTEST PRO Specifications

General

Brand	Gossen MetraWatt
Model	SECUTEST PRO
Category	Measuring Instruments
Language	English