68 GMC-I Messtechnik GmbH
13.8 Returns and Environmentally Sound Disposal
The instrument is a category 9 product (monitoring and control
instrument) in accordance with ElektroG (German electrical and
electronic device law). This device is subject to the RoHS direc-
tive. Furthermore, we make reference to the fact that the current
status in this regard can be accessed on the Internet at
www.gossenmetrawatt.com by entering the search term WEEE.
We identify our electrical and electronic devices in
accordance with WEEE 2012/19/EU and ElektroG
using the symbol shown at the right per DIN EN 50419.
These devices may not be disposed of with the trash.
Please contact our service department regarding the return of old
devices (see address in Section 15).
14 Appendix
The following devices have been tested for use with the test
instrument. We are unable to offer any guarantees regarding use
with other devices.
14.1 List of Suitable Printers
• Z721S thermal printer
• Z721D barcode printer (as of firmware V1.3.0)
Setup options in the SETUP switch position
(Setup (2/3) > Printer > Z721D > Printer settings):
Paper size: 6 mm, 9 mm, 12 mm, 18 mm, 24 mm, 36 mm
Coding: Code 39, Code 128, EAN13
14.2 List of Suitable Barcode Scanners and RFID Scanners
• Z751A barcode scanner
• Z751E RFID scanner (programmer)
To Next Page
Loading...
