CF-9 Component Forming Dies are precisely manufactured
and are available to form Two-Leaded Components with
center-to-center dimensions of up to .400” , as well as TO-92
Transistors.
CF-9 Component Forming Dies can be ordered to form a wide
variety of component shapes. Both common and special
configurations can be produced by using CF-9 Component
Forming Dies.
Component
Forming
Dies
CF-9
611 Hollingsworth Street
Grand Junction, CO 81505
Tel: (970) 245-0408 Fax: (970) 245-9674
Web: www.gpd-global.com
GPD Part No. 905-00
To Next Page
Loading...