Graco D200 - Page 30

Repair
30 313527ZAD
D60 3 in. Dual Post Supply Unit
NXT Air Motors
1. Using a secure hoist, attach motor to mounting plate
(109) with screws (111) and washers (110). See
FIG. 27 on page 27.
2. See Reconnect Displacement Pump in
Check-Mate Pump Packages manual 312376.
3. Connect air hose to motor. If using a remote Data-
Trak, connect electrical connections to the air
motor. See F
IG. 25 on page 27.
S20 3 in. Single Post Supply Unit and L20c
2 in. Elevator
NXT Air Motors
1. Attach motor to mounting bracket with screws (111)
and washers (110). See FIG. 28.
2. See Reconnect Displacement Pump in
Check-Mate Pump Packages manual 312376.
3. Connect air hose to motor. If using a remote Data-
Trak, connect electrical connections to the air
motor. See FIG. 25 on page 27.