Graco D200 - Technical Data; Max Air Input Pressure; Air Inlet Size; Wetted Parts (Displacement Pump)

Technical Data
313527ZAD 67
Technical Data
Max air input pressure (supply system) / Air inlet size
L20c - 2 in. elevator, 5 gal. (20 L)................ 100psi(0.7 MPa, 7 bar) / 1/2 npsm(f)
S20 - 3 in. single post, 5 gal. (20 L) .............. 125psi(0.9 MPa, 9 bar) / 1/2 npt(f)
D60 - 3 in. dual post, 16 gal. (60 L), 5 gal. (20 L), 30 gal.
(115 L) .................................... 150psi(1.0 MPa, 10 bar) / 3/4 npt(f)
D200 - 3 in. dual post, 55 gal. (200 L), 30 gal. (115 L),
16 gal. (60 L), 8 gal. (30 L), 5 gal. (20 L) .......... 150psi(1.0 MPa, 10 bar) / 3/4 npt(f)
D200s - 6.5 in. dual post, 55 gal. (200 L), 30 gal. (115 L) 125 psi (0.9 MPa, 9 bar) / 3/4 npt(f)
Max fluid, air working pressure, and weight
(displacement pump) ............................
For Check-Mate pump packages, see manual 312376.
For Dura-Flo pump packages, see manuals 311826,
311828, 311833.
Wetted parts (displacement pump) ................. ForCheck-Mate displacement pumps, see manual
312375.
For Dura-Flo displacement pumps, see manuals
311717, 311825, 311827.
Platen Codes (see page 7): Part number; Wetted parts
B: 257727, 5 gal. (20 L)
J: 257732, 8 gal. (30 L)
S: 257737, 16gal. (60 L) ......................
Electroless nickel, polyurethane, nitrile, carbon steel,
polyethylene, zinc plated carbon steel, buna, 316 sst,
17-4PH sst
C: 257728, 5 gal. (20 L)
K: 257733, 8 gal. (30 L)
T: 257740, 16gal. (60 L) .......................
Electroless nickel, polyurethane, carbon steel, polyeth-
ylene, nitrile, zinc plated carbon steel, buna, 316 sst
17-4PH sst
F: 257729, 5 gal. (20 L)
L: 257734, 8 gal. (30 L)
U: 257738, 16gal. (60 L) ......................
Stainless steel, polyurethane, PTFE coated nitrile, poly-
ethylene, nitrile, PTFE, 303 sst, 304 sst, 316 sst,
17-4PH sst
G: 257730, 5 gal. (20 L)
M: 257735, 8 gal. (30 L)
W: 257739, 16gal. (60 L) ......................
Electroless nickel, aramind reinforced elastomer, rub-
ber-based PSA, nitrile, polyethylene, zinc plated carbon
steel, buna, 1018 carbon steel, 304 sst, 316 sst, 17-4PH
sst
H: 257731, 5 gal. (20 L)
R: 257736, 8 gal. (30 L)
Y: 257741, 16gal. (60 L .......................
Electroless nickel, aramind reinforced elastomer, rub-
ber-based PSA, polyurethane, polyethylene, nitrile, zinc
plated carbon steel, buna, 1018 carbon steel, 304 sst,
316 sst, 17-4PH sst
7: 255661, 30 gal. (115 L) ..................... zinc plated carbon steel, EPDM, sst, fluoroelastomer
8: 255662, 55 gal. (200 L) ..................... PTFE, EPDM, PTFE coated aluminum, zinc plated
carbon steel, 316 sst
9: 255663, 55 gal. (200 L) ..................... EPDM, aluminum, zinc plated carbon steel, 316 sst
A: 255664, 55 gal. (200 L) ..................... PTFE, neoprene, aluminum, zinc plated carbon steel,
316 sst
D: 24Y343, 55 gal. (200 L)..................... EPDM hose, aluminum, zinc plated carbon steel,
316 sst
Ambient operating temperature range (supply system) 32-120 °F (0- 49°C)
Sound data .................................... Seeseparate air motor manual.
External power supply requirements (DataTrak)
AC power units.............................. 100-240 VAC, 50/60 Hz, single phase, 1.2 amps max
draw
DC power units.............................. 24VDC,1.2amps max draw