Graco D200 - Page 45

Parts
313527ZAD 45
✖ Not shown. ✖ Not shown.
3
Pump Mount 255306 (Xtreme XL
motors on 6.5 in. supply units only)
TI10773A
101
112
116
102
109
103
103
103
115
102
102
114, 113
103
Kits - 257626 and 257628
r_255648_313527_13a
102
101
117
118
120
119
102
103
109
110
111
Note: See page 38 for kit configuration table.
Note: See page 38 for kit configuration table.
Ref. Part. Description Qty
101 257726 ROD, tie bar, shelf 2
102 101533 WASHER, spring lock 4
103 101535 NUT, hex 4
109 BRACKET, shelf 1
110 100133 WASHER, lock 4
111 SCREW, cap, hex hd 4
117 114128 ELBOW, swivel, male; 257628 only 1
118 100896 BUSHING, pipe 1
119 ELBOW, 1/2 OD x 1/2 in. npt 2
120 061513 TUBE, nylon, 1/2 OD x 3/8 ID; 45 in. 1
121✖ SLEEVE, protective; 45 in. 1
122✖ STRAP, tie 2
123✖ HOLDER, cable tie, rotating 2
Ref. Part Description Qty
101 15M686 ROD, lower, platen 2
102 101533 WASHER, spring lock 6
103 101535 NUT, full hex 6
109 617193 PLATE, pump mounting 1
112 617275 ROD, upper tie #(cold cm2100) 2
113 100023 WASHER 3
114 101566 NUT, lock 3
115 113939 NUT, jam, hex 2
116 113993 WASHER, lock, helical 2
124✖ 160327 FITTING, union adapter, 90° 1
125✖ C12034 HOSE, coupled; 72 in. 1
126✖ 552071 SLEEVE, protective, 6 ft 1
127✖ 105281 FITTING, 3.4 nptf x 3/4 npsm, 45° 1