Grandstream Networks GSC35 Series User Manual

GSC35XX Series User Manual
Version 1.0.0.15
P a g e | 77
Firmware File Prefix
Checks if firmware file is with matching prefix before downloading it. This
field enables user to store different versions of firmware files in one
directory on the firmware server.
Firmware File Postfix
Checks if firmware file is with matching postfix before downloading it. This
field enables user to store different versions of firmware files in one
directory on the firmware server.
Firmware Upgrade
Click the "Detect" button to check whether the firmware in the firmware
server has an updated version, if so, update immediately.
Config File
Use Grandstream GAPS
It is used to configure the download path and update mode for the
configuration file server.
• If set to "Yes", the device will set the download path of the
configuration file to “fm.grandstream.com/gs” by default and use
HTTPS protocol to connect to the server.
• If set to "No", then users can manually configure the path and update
mode for the configuration file server.
Config Upgrade Via
Selects provisioning method: TFTP, HTTP or HTTPS. Default setting is
“HTTPS”.
Config Server Path
Sets IP address or domain name of configuration server. The server hosts
a copy of the configuration file to be installed on the device. Default is
“fm.grandstream.com/gs”.
HTTP/HTTPS Username
Configures the username for the config HTTP/HTTPS server.
HTTP/HTTPS Password
Configures the password for the config HTTP/HTTPS server.
Always send HTTP
Basic Authentication
Information
Includes configured username and password in HTTP request before
receiving authentication challenge from the server.
Default is “No”.
Config File Prefix
Checks if configuration files are with matching prefix before downloading
them. This field enables user to store different configuration files in one
directory on the provisioning server.
Config File Postfix
Checks if configuration files are with matching postfix before downloading
them. This field enables user to store different configuration files in one
directory on the provisioning server.
Authenticate Conf File
Sets the device to authenticate configuration file before applying it. When
set to “Yes”, the configuration file must include value P1 with phone
system’s administration password. If it is missed or does not match the
password, the device will not apply it. Default setting is “No”.

Grandstream Networks GSC35 Series Specifications

General

Brand	Grandstream Networks
Model	GSC35 Series
Category	Intercom System
Language	English