Grandstream Networks GSC35 Series User Manual

GSC35XX Series User Manual
Version 1.0.0.15
P a g e | 79
DHCP Option 120
Override SIP Server
Configures the device to allow the DHCP offer message to override the
Config Server Path via the Option 120 header.
The default setting is "Yes".
Note: Reboot the device to make changes take effect.
Allow DHCP Option 242
(Avaya IP Phones)
Enables DHCP Option 242. Once enabled, the device will use the
configuration info issued by the local DHCP in Option 242 to configure
proxy, transport protocol and server path. The default setting is “Yes”.
Note: Reboot the device to make changes take effect.
Config Provision
Download and Process
All Available Config
Files
By default, the device will provision the first available config in the order of
cfgMAC, cfgMAC.xml, cfgMODEL.xml, and cfg.xml (corresponding to
device specific, model specific, and global configs). If set to "Yes", the
device will download and apply (override) all available configs in the order
of cfgMAC, cfg.xml, cfgMODEL.xml, cfgMAC.xml.
Config Provision
Device will download the configuration files and provision by the configured
order. Use arrow buttons to add and order configuration files.
PNP Feature
PnP(3CX) Auto
Provision
Sets the device to broadcast the SIP SUBSCRIBE message during booting
up to allow itself to be discovered and be configured by the SIP platform.
The default setting is "Yes".
Note: Reboot the device to make changes take effect.
Advanced Settings
Disable SIP NOTIFY
Authentication
Disables the SIP NOTIFY Authentication on the device. If set to “Yes”, the
GSC3510/GSC3505 will not challenge NOTIFY with 401. The default
setting is “No”.
Validate Certification
Chain
Configures whether to validate the server certificate when download the
firmware/config file.
If it is set to "Yes", the device will download the firmware/config file only
from the legitimate server. Default setting is "No".
mDNS Override Server
Sets the device to broadcast the Multicast DNS (mDNS) message during
booting up to allow itself to be discovered and be configured by the SIP
platform. If it is set to “User Type A’, the device will broadcast the MDNS
message “A_grandstream-cfg.local”; if it is set to “Use Type SRV”, the
MDNS message will be “SRV_grandstream-cfg.local”.
The default setting is “Use Type A”.
Factory Reset
Resets the device to the default factory setting mode.

Grandstream Networks GSC35 Series Specifications

General

Brand	Grandstream Networks
Model	GSC35 Series
Category	Intercom System
Language	English