Setting and Using the Special Functions
5-5
5.3 Description of Special Functions B
These functions are specified only in the special situations described below, and are not normally used.
Display Language Setting (MENU LANGUAGE SELECTION)
This function sets the language used on the display. One of six languages can be selected:
English, French, German, Italian, Spanish, or Japanese.
5.4 Setting Special Functions B
(1) Turn the cutting plotter on while holding down the (ENTER) and (ORIGIN) keys
simultaneously. The special functions B setting menu is displayed.
DISPLAY ENGLISH
(2) Use the or key to select the desired display language, and then press the (ENTER)
key to confirm. To cancel the selection, press the (NEXT) or (PREV.) key.
(3) Once all the settings have been made, turn off the cutting plotter.
To Next Page
Loading...
