FC8600-UM-251-9370 2-10
2 PARTS NAMES and FUNCTIONS
Attaching a Plotting Pen to the Pen Station
(1) Open the pen-hold mechanism on the pen station, and then attach a pen�
(2) Make sure that the bracket of the pen station is engaged in the upper groove of the pen�
(3) Close the pen-hold mechanism on the pen station to hold the pen in place�
• Do not leave a pen attached to the pen station for a long period of time, as the
pen tip will dry up and make it unusable�
• To store the pen, remove it from the pen station and replace its protective cap�
To Next Page
Loading...
