-38-
Model G0452/P/Z (Mfg. Since 08/12)
T21992—
1
⁄2" x 4' Power Twist V-Belt
Perfect for lathes, table saws, bandsaws and
other powered tools. Smooth running with less
vibration than solid belts. Power Twist
®
V-Belts
can be customized in minutes to any size—just
add or remove sections to fit your needs. Carry a
Power Twist
®
V-Belt in your vehicle for a fix any-
where solution to broken fan belts.
Figure 54. Power Twist V-Belt.
G5562—SLIPIT 1 Qt. Gel
G5563—SLIPIT 12 oz Spray
Use on cast iron table surfaces and other unpaint-
ed metal surfaces to reduce sliding friction and
hangups. This product also reduces rust and pre-
vents resin build-up.
Figure 55. Table gel and spray.
H9876—6" x
5
⁄8" x
1
⁄8" HSS Jointer Knives
These 6" x
5
⁄8" x
1
⁄8" Jointer Knives are made
from HSS steel and are for our G0452 6" Jointer.
Figure 56. Jointer Knives.
T21146—Self-Set System
(Includes 3 Holders & Knife Inserts)
G6665—Dispoz-A-Blade
Knife Inserts
(Set of 3)
Install a Dispoz-A-Blade
®
Knife system in your
new jointer and save up to 70% on knife replace-
ments for the life of your jointer. Each knife insert
is double-edged, so you get two knives in one,
and is indexed so that all knife inserts can be
installed at the same height in just minutes. Yes,
that means you can throw away the knife jig!
Figure 53. Blade holder and knife.
To Next Page
Loading...
Need help?
General
