Grizzly G4000 - Identification

Model G4000 (Mfg. Since 8/09)
-3-
Identification
Figure 1. Model G4000 identification.
Belt
Tensioning
Lever
Spindle
Switch
Change Gear
& Drive System
Cover
Steady
Rest
Follow
Rest
4-Way
Tool
Post
Compound
Slide
Tailstock
Bedway
Longitudinal
Leadscrew
Note: For detailed descriptions of basic controls and components, refer to Basic Controls beginning on
Page 18.
Thread
Dial
Feed
Rate
Lever
NOTICE
If you have never used this type of machine or equipment before, WE STRONGLY RECOMMEND
that you read books, review industry trade magazines, or get formal training before beginning
any projects. Regardless of the content in this section, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
Apron
Feed Lever
Half-Nut Lever
Cross Slide