106
GB
Changing the Fuel Filter
(Picture 14)
Never operate the equipment
without a fuel lter. Change the
fuel lter regularly.
1. Drain the fuel tank (2) into an appro-
priate container.
2.
Pull the fuel suction head (50) out of the
tank with a hook and turn to pull it o.
3.
Replace the fuel lter and place the
removed suction head back in the tank
pic. 14
2
50
Adjusting the Carburettor
The carburettor is preset in the factory for
optimal performance. If subsequent ad-
justments are required, have them carried
out by a specialist workshop.
Maintenance intervals
Machine Part Action
Before
Each Use
Operating Hours
10 20
Screws, nuts, bolts Check, tighten
Air lter Clean or replace
Fuel lter Replace
Spark plug Clean/adjust/replace
Fuel hoses Check, replace if necessary
Complete machine Check, clean if necessary
Operating handle Check for function
Cutting head Check correct installation
To Next Page
Loading...
