English (GB)
70
8.7.72 Display language (4.5.1)
Fig. 128 Display language
Description
Here you select the language for the CU 352 display.
Setting range
• English
•German
•Danish
•Spanish
• Finnish
•French
• Greek
• Italian
•Dutch
• Polish
• Portuguese
•Russian
• Swedish
• Chinese
• Korean
• Japanese
• Czech
• Turkish
• Hungarian
• Bulgarian
•Croatian
• Latvian
• Lithuanian
• Romania
•Slovak
• Slovenian
• Serbian Latin
• US English
• Indonesian
• Malay
• Estonian.
Setting via the operating panel
• Settings > Functions, CU 352 > Display language.
Factory setting
The display language is British English. It can be changed at
startup.
8.7.73 Units (4.5.2)
Fig. 129 Units
Description
Here you can select units for the various parameters.
Select between SI and imperial units. You can also select other
units for the individual parameters.
Setting range
Parameter
Basic setting
Possible units
SI Imperial
Pressure bar psi kPa, MPa, mbar, bar, m, psi
Differential
pressure
m psi kPa, MPa, mbar, bar, m, psi
Head m ft m, cm, ft, in
Level m ft m, cm, ft, in
Flow rate m
3
/h gpm
m
3
/s, m
3
/h, l/s, gpm, yd
3
/s,
yd
3
/min, yd
3
/h
Volume m
3
gal l, m
3
, gal, yd
3
Specific
energy
kWh/m
3
Wh/gal
kWh/m
3
, Wh/gal, Wh/kgal,
BTU/gal, HPh/gal
Temperature °C °F K, °C, °F
Differential
temperature
KKK
Power kW HP W, kW, MW, HP
Energy kWh kWh kWh, MWh, BTU, HPh
If units are changed from SI to imperial or vice versa,
all individually set parameters will be changed to the
basic setting in question.
To Next Page
Loading...
Need help?
General
