User Manual 9065/9065plus
MAN10772-00 33
where:
Output queue: enter the name of the AS/400 outpu queue.
Remote System: enter the host name of your printer or INTNETADR, which then prompts you to
specify the IP address of your printer.
Remote Printer Queue: set to “pr1” through “pr4”. The remote printer queue name must be all lower
case, entered in single quotes.
Writer to Autostart: set the value to “1”.
Connection Type: specify this value as "IP".
Destination Type: specify “XAUTOQXAIX”.
Transform: specify “YES”.
Manufacturer Type: select a manufacturer type and model. Select “IBM6400EP” for Epson
emulation or “IBM6400PR" or "IBM42023" for IBM Proprinter.
Internet Address: specify the IP address of the printer.
To Next Page
Loading...