User Manual 9065/9065plus
MAN10772-00 77
Paper Path Selection
This function defines the default paper path for the current macro. Paper Path selection depends upon the printer model
and the installed options.
SLASH ZERO NO
↑
PATH FRONT 1
→
or
←
PATH FRONT 2
→
or
←
↓
TEAR NORMAL
PATH FRONT 1 Paper loading with the Front1 push tractor (low position).
PATH FRONT 2 Paper loading with the Front2 push tractor (up position). This item is displayed only if the
Front2
push tractor option is installed.
Tear-Off Mode
PATH FRONT 1
↑
TEAR NORMAL
→
or
←
TEAR AUTOMATIC
→
or
←
LABEL
→
or
←
TEAR NO
→
or
←
↓
TEAR DELAY 1
TEAR
NORMAL
The Tear-Off Function is performed pressing the
TEAR
key when the printer is offline.
TEAR
AUTOMATIC
When the printer is not receiving any data, the paper is moved to the Tear-Off position.
It is returned to the Tear-Off position as soon as it receives printing data.
LABELS
This item must be set when printing on labels, in order to avoid paper jams.
The paper does not execute any backward movement. When pressing the
PARK
key, the
paper is ejected.
TEAR
NO
The paper does not execute any backward movement.
See also “How to Use the Tear-Off Function ” and “How to Handle the Paper Parking ”
later in this chapter
To Next Page
Loading...