User Manual 9065/9065plus
MAN10772-00 78
Tear Delay Mode
TEAR NORMAL
↑
TEAR DELAY 1
→
or
←
TEAR DELAY …
→
or
←
TEAR DELAY 5
→
or
←
↓
STRONG IMPACT
This item defines the time that printer uses to move paper to the Tear-Off position in automatic tear mode. The range of the
tear delay is between 1 and 5 seconds. The default value is 1 sec.
Print Impact Strength
TEAR DELAY 1
↑
STRONG IMPACT
→
or
←
SOFT IMPACT
→
or
←
↓
PERFOR. SAFE NO
STRONG
IMPACT
The impact strength of the print head is set for printing on multicopy paper.
SOFT
IMPACT
The impact strength of the print head is set for printing few copies. The printing noise is
reduced.
Paper Perforation
This function allows to move the print head aside the paper when the fanfold paper perforation passes between the mylar and
the print bar, to facilitate paper movement on critical forms.
STRONG IMPACT
↑
PERFOR. SAFE NO
→
or
←
PERFOR. SAFE YES
→
or
←
↓
QUIET PRINT OFF
PERFOR.
SAFE
NO
The function is disabled. The print head remains in its position, when the perforation of the
paper passes.
PERFOR.
SAFE
YES
The function is enabled. The print head is moved aside, when the perforation passes.
To Next Page
Loading...