GSi DMC Design III Series User Manual

4. Assembly and Installation
PNEG-1156ETL Design III Series Grain Stir-Ator CSA 43
Figure 4AS
6. Hook wire support “S” hook to support chain approximately 12" above the shut off chain.
(See Figure 4AT.)
Figure 4AT
7. After adjustments are completed, “S” hooks on the suspension chains and shut off chains should
be closed.
The lead-in wire from the Stir-Ator to the switch box must be longer and looser than
the shut off chain itself. Should the Stir-Ator malfunction and engage the shut off,
this prevents the lead-in wire from being torn from the switch box which could
result in serious electrical shock.
Operating the Stir-Ator without the shut off chain properly assembled and
installed could result in serious electrical shock or bodily injury and would void
the warranty.
See Pages 17, 23 and 24 for proper installation and clearance of the shut off chain
and Stir-Ator.
WARNING
Design III Stir-Ator

GSi DMC Design III Series Specifications

General

Brand	GSi
Model	DMC Design III Series
Category	Industrial Equipment
Language	English