GST200 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
The Intelligent Solution
Page 31
6.2.2.7 Browsing disable messages
You can view disable messages by pressing VIEW DISABLE when the screen is
displaying non-disable messages. The screen of loop mode is shown in Fig. 6-12 and
the screen for zone mode is shown in Fig. 6-13 and Fig. 6-14.
Fig. 6-12
001 of 003 Disable 12:01
Zone：001－004Sounder
Office1
001 of 003 Disable 12:01 //There are three disabled devices in the system and this
is the first.
Zone: 001－004Sounder //The zone number, address and device type of the
disabled device.
Office1 //Description message of the disabled device.
Fig. 6-13
001 of 002
Disable 12:01
Zone：005－Z-005
029/029
Zone Fully Disabled
001 of 002 Disable 12:01 // There are devices from 2 zones that are disabled, and
this is the first zone.
Zone: 005－Z-005 // Zone number and description message of the disabled
zone.
029/029 // All 29 devices of the current zone are disabled.
Zone Fully Disabled // Current zone are completely disabled.
Fig. 6-14
002 of 002
Disable 12:01
Zone：006－Z-006
016/030
Zone Part Disabled
To Next Page
Loading...
