GVA G24HTC16 - DTV Manual Scan (DTV Mode)

27
Advanced Features
3. Press the OK button or the button to enter the Digital Manual
Scan menu.
2. Press the
buttons to select Manual Scan and then press the
OK button or the
button to enter the Manual Scan menu.
5. Channel tuning will commence. This operation may take up to few
minutes. The display will show the progress of the tuning and the
number of channels found.
6. If you select DTV + ATV and you want to skip the DTV tuning during
scanning, press the MENU button to interrupt the tuning half way.
You will then go straight to ATV tuning. You may repeat the above
step if you want to skip ATV tuning.
7. After tuning is complete, the channels are arranged in a preset
order. If you wish to skip channels, modify the preset order or
rename channels, select Channel Edit under the channel menu
(refer to page 29-31 for details).
DTV Manual Scan (DTV Mode)
Allows you to make manual fine tuning adjustments to the channel under DTV channel.
1. Press the MENU button to display the main menu. Press the
buttons to select the Channel menu and then press the
button or
the OK button.
4. Press the
button to select Start and then press the OK button or
the
button to start auto tuning.
Auto Scan
Country
Mode
LCN
Start
Move MENU: Return EXIT: Exit
Australia
DTV
On
OK: Select
Auto Scan
Scanning CH22
Digital Channels Found:
DTV :0 Radio :0 Data :0
MENU: Stop EXIT: Exit
Channel
Auto Scan
Manual Scan
Auto Channel Update
Channel Edit
Favourite Manager
Signal Information
On
MENU: Return EXIT: ExitMove
Channel
Auto Scan
Manual Scan
Auto Channel Update
Channel Edit
Favourite Manager
Signal Information
On
MENU: Return EXIT: ExitMove OK: Select
Manual Scan
Digital Manual Scan
Move MENU: Return EXIT: ExitOK: Select
G24HTC16_IB_160630-V2_Annie.indd 27 30/6/16 下午6:06