GW Instek ASR-2000 Series - Page 50

ASR-2000 Programming Manual
50
Common Commands
*CLS ....................................................................... 50
*IDN ...................................................................... 50
*OPC ...................................................................... 50
*RCL ...................................................................... 51
*RST ....................................................................... 51
*SAV ...................................................................... 51
*WAI ..................................................................... 52
*CLS
Set
Description
The *CLS command clears all the event registers,
including the status byte, event status and error
queue.
Syntax
*CLS
*IDN
Query
Description
Queries the manufacturer, model name, serial
number, and firmware version of the APS.
Query Syntax
*IDN?
Return parameter
<string>
Returns the instrument identification as a
string in the following format:
GWINSTEK,ASR-2XXX,GXXXXXXXX,XX.XX.XX.XXXX-X
Manufacturer: GW-INSTEK
Model number : ASR-2XXX
Serial number : GXXXXXXXX
Firmware version : XX.XX.XX.XXXX-X
*OPC
Set
Query
Description
The *OPC? Query returns 1 when all the
outstanding commands have completed.