REMOTE CONTROL
51
Returns 1 when all the outstanding
commands have completed.
Recalls the contents stored in memory slot M0 ~
M9. These memory slots are mapped to the preset
settings.
*RCL {<NR1>|MINimum|MAXimum}
0 ~ 9 (as memory M0 ~ M9)
Recalls the M0 memory contents.
Recalls the M9 memory contents.
Performs a device reset. Configures the unit to a
known configuration (default settings). This
known configuration is independent of the usage
history.
Saves the settings into memory slot M0 ~ M9.
These memory slots are mapped to the preset
settings.
*SAV {<NR1>|MINimum|MAXimum}
0 ~ 9 (as memory M0 ~ M9)
Saves to the M0 memory slot.
Saves to the M9 memory slot.
To Next Page
Loading...
Need help?
General
