GW Instek ASR-2000 Series - Page 63

REMOTE CONTROL
63
Memory Commands
:MEMory:RCL ..................................................... 63
:MEMory:SAV ..................................................... 63
:MEMory:RCL
Set
Description
Recalls the settings from memory slot M0~M9.
These memory slots are mapped to the preset
settings. Equivalent to the *RCL command.
Syntax
:MEMory:RCL {<NR1>|MINimum|MAXimum}
Parameter
<NR1>
0~9
MINimum
0
MAXimum
9
Example
:MEMory:RCL
Recall the settings to M1.
:MEMory:SAV
Set
Description
Saves the settings into memory slot M0 ~ M9.
These memory slots are mapped to the preset
settings. Equivalent to the *SAV command.
Syntax
:MEMory:SAV {<NR1>|MINimum|MAXimum}
Parameter
<NR1>
0~9
MINimum
0
MAXimum
9
Example
:MEMory:SAV 1
Save the settings to M1.