GW Instek ASR-2000 Series - Page 64

ASR-2000 Programming Manual
64
Output Commands
:OUTPut[:STATe] ................................................ 64
:OUTPut:PON ...................................................... 64
:OUTPut:PROTection:CLEar ............................. 65
:OUTPut:RELay ................................................... 65
:OUTPut[:STATe]
Set
Query
Description
Sets or queries the output state of power source.
Syntax
Query Syntax
:OUTPut[:STATe] {<bool>|OFF|ON}
:OUTPut[:STATe]?
Parameter
OFF | 0
Turns the output off.
ON | 1
Turns the output on.
Return parameter
<bool>
Returns output status of the instrument.
Example
:OUTP 0
Sets power output off.
:OUTPut:PON
Set
Query
Description
Sets the output state at power-on.
Syntax
Return Syntax
:OUTPut:PON {<NR1>|OFF|ON|SEQ|SIM}
:OUTPut:PON?
Parameter
<NR1>
0 ~ 3
OFF| 0
Disabled
ON | 1
Enabled
SEQ | 2
Sequence function
SIM | 3
Simulate function
Return parameter
<NR1>
Returns the selected output state at power-
on from 0 to 3.
Example
:OUTPut:PON 2
Sets sequence function on at power-on.