GW Instek ASR-3000 Series - Page 160

ASR-3000 Series User Manual
160
Sync Code
LL, LH, HL, HH
16. Go to the ON Phs setting and set the starting
phase of the step. The Fixed indicates user-
defined degree.
ON Phase
Free, Fixed
ON Phase
0.0 ~ 359.9º
Resolution
0.1º
17. Go to the OFF Phs setting and set the end phase
of the step. The Fixed indicates user-defined
degree.
OFF Phase
Free, Fixed
OFF Phase
0.0 ~ 359.9º
Resolution
0.1º