GW Instek ASR-3000 Series User Manual

APPENDIX
211
DCDC Power Unit
Error
Internal DCDC power unit
function error. Press "Shift +
Cancel" to clear this alarm. If else
continue alarm, contact local
distributor.
Output Off
PFC Power Unit Error
Internal PFC power unit function
error. Press "Shift + Cancel" to
clear this alarm. If else continue
alarm, contact local distributor.
Output Off
Sensing Voltage Error
Remote sense connection wire is
abnormal or over maximum
compensation voltage. Press
"Shift + Cancel" to clear this
alarm.
Output Off
Startup Anomaly
Abnormal startup procedure.
Contact service center.
System Lock
External Sync
Frequency Error
The external synchronization
signal input frequency is out of the
allowance range. (40Hz ~
999.9Hz)
Output Off
SCPI Error
Communication with the SCPI
command error
Display Message
Only
Power ON Fail
Power ON Function Fail In Error
Mode or Range
IRMS Limit
The RMS current limiter is
activated. Press "Irms" to check
allowance set range
IPK Limit
The peak current limiter is
activated. Press " Shift + Irms" to
check allowance set range
Remote Sensing
Voltage Out of Range
The Sensing voltage limiter is
activated.
Display Message
Only
System Error (#)
System Error (1~15). Contact
service center.
Display Message
Only
Power Limit
The Power limiter is activated
Web Data Error
This message will only be shown
when texio update file is used and
firmware is selected gw.
Preset Data Error
Preset data error (data beyond
range or data lost)
Display Message
Only
ARB Data Error
ARB data error (data lost)
Display Message
Only

GW Instek ASR-3000 Series Specifications

General

Brand	GW Instek
Model	ASR-3000 Series
Category	Portable Generator
Language	English