GW Instek ASR-3000 Series User Manual

ASR-3000 Series User Manual
212
Note
The system would be locked or output off automatically
before the error state is cleared.
Normal Messages
Description
Protection type
Setting Voltage Limited
Setting voltage be limited,
press "Shift + V" to check
allowance set range
Display Message
Only
Setting Frequency
Limited
Setting frequency be limited,
press "Shift + F" to check
allowance set range
Display Message
Only
Keys Locked
All of keys are locked, except
output key. Long push “Lock”
to disable Keys Locked.
Display Message
Only
Keys Unlocked
All of keys are unlocked
Display Message
Only
Screen Saved to
USB:/GWDIMC###.bmp
Screenshot be saved to USB
memory successful
Display Message
Only
Hardcopy Fail!
(Too Many Files in USB)
Hardcopy Fail !, Over 1000 files
in USB
Display Message
Only
USB Memory
Unconnected
Could not detect USB memory
Display Message
Only
Preset Mode
Operation at preset mode
Display Message
Only
Exit Preset Mode
Exit preset mode
Display Message
Only
Invalid with Remote
Control
All of keys are locked, except
Output and Shift and Local Key.
Press "Shift + Preset" to disable
Remote Control.
Display Message
Only
Invalid with Remote Lock
Control
All of keys including Output
and Local Keys are locked.
Display Message
Only
Invalid in This Meter
Frozen
Invalid Operation In This Meter
Frozen. Press "F4" to disable
Meter Frozen
Display Message
Only
Invalid in This Page
Invalid Operation In This Page.
Valid main and simple page for
preset mode.
Display Message
Only
Recalled From M#
Recalled Preset From M0 ~ M9
Display Message
Only
Saved To M#
Saved Preset To M0 ~ M9
Display Message
Only

GW Instek ASR-3000 Series Specifications

General

Brand	GW Instek
Model	ASR-3000 Series
Category	Portable Generator
Language	English