GW Instek ASR-3000 Series - Page 213

APPENDIX
213
Resetting...
Ready For Recall Factory
Default
Display Message
Only
Failed Factory Default
Recall Factory Default Failed
Display Message
Only
Error Password
Input Error Password
Display Message
Only
No File ([Filename]) in
[directory]
Not find specific file in USB
specific directory
Display Message
Only
Saved to DEF1
Saved Setting to DEF1
Display Message
Only
Saved to DEF2
Saved Setting to DEF2
Display Message
Only
Meter Frozen
Operation at Meter Frozen
mode, all measure value will
stop update.
Display Message
Only
Only AC Mode And
50/60Hz Active
Harmonic Page Limit Message
Display Message
Only
[Filename] Saved Success
Save file to USB success
message.
[Filename] ex Preset0.Set or
SEQ0.SEQ or SIM0.SIM or
ARB1.ARB
Display Message
Only
[Filename] Save Fail
Save file to USB fail message
Display Message
Only
[Filename] Recalled
Success
Recalled file success message
Display Message
Only
[Filename] Recall Fail (No
File in [directory])
Recall file fail message (not find
specific file in USB specific
directory)
Display Message
Only
[Filename] Recall Fail
(Model ([Model]) Error
Recall file fail message. (Preset,
Seq and Sim files could Not be
recalled among varied models,
e.g., file of ASR-3200 can Not
be recalled in ASR-3300, ASR-
3400 or ASR-3400HF.)
Display Message
Only
[Filename] Recall Fail
(File Format Error)
Recall file fail message (file
format error)
Display Message
Only
Preset M# Deleted
Preset M0~M9 Deleted
Display Message
Only
ARB# Deleted
ARB1~ARB16 Deleted
Display Message
Only
USB Memory Connected
Detect USB Memory connected
Display Message
Only