Replaceable Parts and Disassembly
87
Main PCB and Front/Rear/Bottom Panel Removal
1. Remove the outer casing. Page 86
2. Remove the 5 screws holding the
main PCB to the bottom case.
3. Remove the terminal connector the
ribbon cable coming from the front
panel PCBs.
4. Slide the rear panel out carefully.
5. Remove the connections from the
power socket and remove the rear
panel grounding connection.
6. Slide the main PCB out from the
bottom case.
7. Slide the front panel PCB up to
remove from the bottom case.
Removal of the main PCB and the front, rear and bottom panels is complete.
Reverse the procedure to re-assemble.
To Next Page
Loading...
