GW Instek GDS-1102B - Measurement:meas<X>:State; Measurement:meas<X>:Type

GDS-1000B Programming Manual
102
Return parameter
CH1 to CH4
Channel 1, 2, 3, 4
MATH
Math source
Example
:MEASUrement:MEAS1:SOURCE1
>CH1
Returns the (first) source for measurement 1.
:MEASUrement:MEAS<X>:TYPe
Description
Sets or queries the measurement type for a selected
automatic measurement. This is a statistics related
command.
Syntax
:MEASUrement:MEAS<X>:TYPe
{PK2pk | MAXimum | MINImum | AMPlitude | HIGH |
LOW | MEAN | CMEan | RMS | CRMs | AREa | CARea |
ROVShoot | FOVShoot | RPReshoot | FPReshoot |
FREQuency | PERIod | RISe | FALL | PWIdth | NWIdth |
PDUTy | PPULSE | NPULSE | PEDGE | NEDGE
| FRRDelay | FRFDelay | FFRDelay | FFFDelay |
LRRDelay | LRFDelay | LFRDelay | LFFDelay | PHAse
| ?}
Related
commands
:MEASUrement:MEAS<X>:SOURCE<X>
Parameter
MEAS<X>
The automatic measurement number
from 1 to 8.
Return parameter
Returns the measurement type
Example
:MEASUrement:MEAS1:TYPe RMS
Sets measurement 1 to RMS measurement.
:MEASUrement:MEAS<X>:STATE
Description
Sets or queries the state of a selected measurement.
This is a statistics related command.
Syntax
:MEASUrement:MEAS<X>:STATE { ON | OFF | 1 | 0
| ? }
Set
Query
Set
Query