GW Instek GDS-1102B - Remotedisk:automount; Remotedisk:ipaddress

GDS-1000B Programming Manual
160
Parameter/Return
parameter
OFF
Unmount remote disk
ON
Mount remote disk
Example
:REMOTEDisk:IPADDress "172.16.5.154"
:REMOTEDisk:PATHName "remote_disk"
:REMOTEDisk:USERName "guest"
:REMOTEDisk:PASSWord "password"
:REMOTEDisk:MOUNT ON
Sets the remote disk parameters and mounts the
remote disk.
:REMOTEDisk:AUTOMount
Description
Turns automount on/off or queries its state. The
remote disk must be configured beforehand.
Note
This command is only available on 4 channel
models.
Syntax
:REMOTEDisk:AUTOMount { OFF | ON | ? }
Parameter/Return
parameter
OFF
Don’t mount the remote disk at start
up.
ON
Automatically mount the remote disk
on start up.
Example
:REMOTEDisk:AUTOMount ON
Turns the automount function on.
Set
Query