GW Instek GDS-1102B - Measure:gating; Measure:source

COMMAND DETAILS
77
:MEASure:AREa .......................................................... 94
:MEASure:CARea ........................................................ 94
:MEASure:FRRDelay ................................................... 95
:MEASure:FRFDelay .................................................... 95
:MEASure:FFRDelay .................................................... 96
:MEASure:FFFDelay .................................................... 97
:MEASure:LRRDelay ................................................... 97
:MEASure:LRFDelay .................................................... 98
:MEASure:LFRDelay .................................................... 98
:MEASure:LFFDelay .................................................... 99
:MEASure:PHAse .......................................................100
:MEASure:GATing
Description
Sets or queries the measurement gating.
Syntax
:MEASure:GATing { OFF | SCREen | CURSor | ? }
Parameter
OFF
Full record
SCREen
Gating set to screen width
CURSor
Gating between cursors
Return parameter
Returns the gating. (OFF, SCREEN, CURSOR)
Example
:MEASure:GATing OFF
Turns gating off (full record).
:MEASure:SOURce
Description
Sets or queries the measurement source for source1
or source2.
Syntax
:MEASure:SOURce<X> { CH1 | CH2 | CH3 | CH4 |
MATH | ? }
Parameter
<X>
Source1 or source2
CH1~CH4
Channel 1 to 4
Set
Query
Set
Query