GW Instek GDS-1102B - Remote Disk Commands; Remotedisk:ipaddress; Remotedisk:pathname

GDS-1000B Programming Manual
158
Remote Disk Commands
The remote disk commands are only available on 4 channel models.
:REMOTEDisk:IPADDress ......................................... 158
:REMOTEDisk:PATHName ....................................... 158
:REMOTEDisk:USERName ....................................... 159
:REMOTEDisk:PASSWord ......................................... 159
:REMOTEDisk:MOUNT ............................................ 159
:REMOTEDisk:AUTOMount ..................................... 160
:REMOTEDisk:IPADDress
Description
Sets or returns the IP address of remote disk.
Note
This command is only available on 4 channel
models.
Syntax
:REMOTEDisk:IPADDress {<string>|?}
Parameter/
Return parameter
<string>
IP address enclosed in double quotes.
Eg., 172.16.20.255
Example
:REMOTEDisk:IPADDress “172.16.20.255”
Sets the remote disk IP address as 172.16.20.255.
:REMOTEDisk:PATHName
Description
Sets or returns the file path of the remote disk.
Note
This command is only available on 4 channel
models.
Syntax
:REMOTEDisk:PATHName {<string>|?}
Parameter/
Return parameter
<string>
File path is enclosed in double quotes
eg., “remote_disk”
Example
:REMOTEDisk:PATHName “remote_disk”
Sets the file path to c:/remote_disk.
Set
Query
Set
Query