GW Instek GDS-1102B - Ethernet Commands

GDS-1000B Programming Manual
140
Ethernet Commands
:ETHERnet:DHCP ...................................................... 140
:ETHERnet:DHCP
Description
Sets or queries the DHCP settings.
Note
The Ethernet commands are only applicable to GDS-
1074B & GDS-1104B.
Syntax
:ETHERnet:DHCP { OFF | ON | ? }
Parameter
ON
Turns DHCP on.
OFF
Turns DHCP off.
Example
:ETHERnet:DHCP ON
Turns DHCP on.
Set
Query