GW Instek GPP-1326 User Manual

REMOTE CONTROL
119
Command Details
When using commands to select a specific channel, [1] stands for
CH1, [2] stands for CH2, [3] stands for CH3, [4] stands for CH4. "1"
can be omitted when you want to select CH1 as it is selected by
default. However if you wish to select CH2, "2" must be selected.
Measurement Commands
Command
:MEASure[1|2|3|4] :<function>?
Function
Performs a “READ?” query on the specified
measurement function.
Description
<function>
CURRent[:DC]:Measures the current.
VOLTage[:DC]:Measures the voltage.
POWEr[:DC]:Measures the power.
Example
:MEASure2:CURRent?
Reads back the CH2 current value.
Command
:MEASure[1|2|3|4]:ALL?
Function
Query the all measurement functions
Description
<ALL>: VOLTage,CURRent,POWEr
Example
:MEASure2:ALL?
Reads back the CH2 voltage ,current and power
value
Command
:MEASure:<function>:ALL?
Function
Query the specified measurement function in all
channels
Description
< function >: VOLTage,CURRent,POWEr

GW Instek GPP-1326 Specifications

General

Brand	GW Instek
Model	GPP-1326
Category	Power Supply
Language	English