GPP Series User Manual
126
Source and Load Commands
:SOURce[1|2|3|4]:CURRent <NRf>
:SOURce2:CURRent 1.0005
Sets the current level to 1.0005A for CH2.
X :1= CH1, 2= CH2, (4323: 3 = CH3, 4= CH4)
<NR2>:Decimal number, range 0-6.200A
ISET1:2.234
Sets the CH1 output current to 2.234A.
:SOURce[1|2|3|4]:CURRent?
Queries the current limit level.
:SOURce2:CURRent?
Queries the current limit level on CH2.
Returns the output current setting.
X :1= CH1, 2= CH2, (4323: 3 = CH3, 4= CH4)
ISET1?
Returns the CH1 output current setting.
:SOURce[1|2|3|4]:CURRent[:LIMit]:STATe?