GW Instek GPP-1326 User Manual

REMOTE CONTROL
149
Description
<No>: The serial number 0 ~ 2047 of the first group
within the several sequence output parameters that are
in need of query.
<count> is group number of sequence parameter in
need of query. Integer, 1 to 2048.
Example
:SEQUence2:PARAmeter? 1,2
Queries 2 groups’ sequence parameters from the
1st group for CH2.
Command
:SEQUence[1|2]:STARt <value>
Function
Sets the sequence number for initial execution.
<value>: Integer 0 - 2047
Example
:SEQUence2:STARt 10
Sets the CH2 sequence output to start from the group 11.
Command
:SEQUence[1|2]:STARt?
Function
Queries the sequence number for initial execution of
the channel sequence output.
Example
:SEQUence2:STARt?
Returns the initial sequence number of CH2 sequence
output.
Command
:SEQUence[1|2][:STATe] {ON|OFF}

GW Instek GPP-1326 Specifications

General

Brand	GW Instek
Model	GPP-1326
Category	Power Supply
Language	English