GW Instek GPP-1326 User Manual

GPP Series User Manual
66
State
Under the Delay function, press the
F2 (Edit) button, and then the F2
(State) button followed by selecting
F1 (On), F2 (Off) or F3 (Inverted) to
set output On/Off status of each
group.
Time
Under the Delay function, press the
F2 (Edit) button followed by
selecting the F3 (Time). The setting
on LCD is activated. Use number
pad to set the parameters directly
and then press the F1 (Second)
button to confirm; or use arrow
keys along with scroll wheel to
complete the setting.
Patterm
Under the Delay function, press the
F2 (Edit) button followed by
selecting F4 (Pattern), and then set
up via F1 (01Patt) and F2 (10Patt).
The live setting result appears on
the LCD.
Time Set
Under the Delay function, press the
F2 (Edit) button followed by
selecting the F5 (Time Set), and then
set time change patterns of each
group, 3 types (fix (FixTime),
increase (Increase) and decline
(Decline) of which are available) via
F1 (Model). The live setting result
appears on the LCD.
On Delay
Off Delay
When fix (FixTime) is set in Time
Set, it’s available to set the time
value of both F2 (On Delay) and F3
(Off Delay)at the same time.

GW Instek GPP-1326 Specifications

General

Brand	GW Instek
Model	GPP-1326
Category	Power Supply
Language	English