1. Press right arrow button to enter the
list of 10 groups. Rotate the scroll
wheel (Encode) to select target file.
Also rotate the scroll wheel (Encode)
to enter the flash drive when
necessary.
2. Press F3 (Save) button to save the
temporary data into the
corresponding file.
3. Press F4 (Recall) button to save the
record data of file into the
temporary storage for further saving
into flash drive later.
Type/*.CSV/ *.REC/New
File/Select buttons appear when
flash drive is selected.
Type is used to select *.CSV and
*.REC file types.
New File is used to create new file.
Select is used to open the required
file folder.
To Next Page
Loading...
Need help?
General
