H3C MSR Series

45
Figure 15 Adding an access device
2. Add a service:
a. Click the Service tab.
b. Select Access Service > Access Device from the navigation tree.
c. Click Add.
d. On the page that appears, set the service name to mac, keep the default values for other
parameters, and click Apply.
Figure 16 Adding a service
3. Add an account:
a. Click the User tab.
b. Select User > All Access Users from the navigation tree.
c. Click Add.
d. On the page that appears, enter a username 00146c8a43ff, enter an account and
password 00146c8a43ff, select the service mac, and click Apply.