H3C S5560S-EI Series User Manual

1-4
Table1-3 Technical specifications for non-PoE switches of the S5560S-EI series (2)
Item S5560S-28F-EI S5560S-52F-EI
Dimensions (H × W × D) 43.6 × 440 × 360 mm (1.72 × 17.32 × 14.17 in)
Weight
≤ 6 kg (13.23 lb) ≤ 6.5 kg (14.33 lb)
Console port
1 × Micro USB console port
1 × serial console port
Only the Micro USB console port is available when you connect both ports.
Management Ethernet
port
1 N/A
10/100/1000BASE-T
autosensing Ethernet
port
8 (Each and its corresponding SFP port
form a combo interface.)
2 (Each and its corresponding SFP
port form a combo interface.)
SFP port
24 (The rightmost eight SFP ports and
their corresponding 10/100/1000BASE-T
autosensing Ethernet ports form combo
interfaces.)
48 (The rightmost two SFP ports
and their corresponding
10/100/1000BASE-T autosensing
Ethernet ports form combo
interfaces.)
SFP+ port 4
Power supply slot 2, on the rear panel
Input voltage
PSR75-12A:
• Rated voltage:
 100 VAC to 240 VAC @ 50 or 60 Hz
 240 VDC
• Max voltage:
 90 VAC to 290 VAC @ 47 to 63 Hz
 180 VDC to 320 VDC
PSR150-A1:
• Rated voltage: 100 VAC to 240 VAC @ 50 or 60 Hz
• Max voltage: 90 VAC to 264 VAC @ 47 to 63 Hz
PSR150-D1:
You can use a –48 VDC power source in the equipment room or an H3C RPS
(RPS800-A or RPS1600-A)
• Rated voltage: –48 VDC to –60 VDC
• Max voltage: –36 VDC to –72 VDC
Minimum power
consumption
• Single PSR75-12A input: 15 W
• Single PSR150-A1 input: 18 W
• Single PSR150-D1 input: 18 W
• Dual PSR75-12A inputs: 17 W
• Dual PSR150-A1 inputs: 23 W
• Dual PSR150-D1 inputs: 22 W
• Single PSR75-12A input: 26 W
• Single PSR150-A1 input: 27 W
• Single PSR150-D1 input: 27 W
• Dual PSR75-12A inputs: 29 W
• Dual PSR150-A1 inputs: 32 W
• Dual PSR150-D1 inputs: 33 W
Maximum power
consumption
• Single PSR75-12A input: 45 W
• Single PSR150-A1 input: 48 W
• Single PSR150-D1 input: 51 W
• Dual PSR75-12A inputs: 48 W
• Dual PSR150-A1 inputs: 55 W
• Dual PSR150-D1 inputs: 57 W
• Single PSR75-12A input: 69 W
• Single PSR150-A1 input: 74 W
• Single PSR150-D1 input: 84 W
• Dual PSR75-12A inputs: 72 W
• Dual PSR150-A1 inputs: 95 W
• Dual PSR150-D1 inputs: 95 W
Chassis leakage current
compliance
UL 62368-1/EN 62368-1/IEC 62368-1/UL 60950-1/EN 60950-1/IEC
60950-1/GB4943.1

H3C S5560S-EI Series Specifications

General

Brand	H3C
Model	S5560S-EI Series
Category	Switch
Language	English