EasyManua.ls Logo

H3C S5560X-EI Series - Page 18

H3C S5560X-EI Series
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Gateway Interface : VSI-interface 100
VXLAN ID : 10
Tunnels:
Tunnel Name Link ID State Type Flood proxy
Tunnel1 0x5000001 Up Manual Disabled
Tunnel2 0x5000002 Up Manual Disabled
MTunnel0 0x6002710 Up Auto Disabled
ACs:
AC Link ID State Type
GE1/0/1 srv1000 0 Up Manual
Table 8 Command output
Field
Description
VSI Description
Description of the VSI. If the VSI does not have a description, the command does
not display this field.
VSI State
VSI state:
UpThe VSI is up.
DownThe VSI is down.
Administratively downThe VSI has been manually shut down by using
the
shutdown
command.
MTU MTU on the VSI.
Bandwidth
This field is not supported in the current software version.
Bandwidth limit in kbps.
If no bandwidth limit is set for the VSI,
Unlimited
is displayed.
Broadcast Restrain
This field is not supported in the current software version.
Broadcast restraint bandwidth (in kbps).
If the broadcast restraint bandwidth is not set,
Unlimited
is displayed.
Multicast Restrain
This field is not supported in the current software version.
Multicast restraint bandwidth (in kbps).
If the multicast restraint bandwidth is not set,
Unlimited
is displayed.
Unknown Unicast
Restrain
This field is not supported in the current software version.
Unknown unicast restraint bandwidth (in kbps).
If the unknown unicast restraint bandwidth is not set,
Unlimited
is displayed.
MAC Learning State of the MAC learning feature.
MAC Table Limit
This field is not supported in the current software version.
Maximum number of MAC address entries on the VSI.
MAC Learning rate
This field is not supported in the current software version.
MAC address entry learning rate of the VSI.
Drop Unknown
This field is not supported in the current software version.
Action on source MAC-unknown frames received after the maximum number of
MAC entries is reached.
Flooding
State of the VSI's flooding feature:
EnabledFlooding is enabled on the VSI.
DisabledFlooding is disabled on the VSI.
Statistics
Packet statistics state:
EnabledThe packet statistics feature is enabled for the VSI.

Table of Contents

Other manuals for H3C S5560X-EI Series

Related product manuals