57
Item S5560X-30C-EI S5560X-54C-EI S5560X-30F-EI S5560X-54F-EI
Operating
temperature
-5°C to 45°C (23°F to 113°F)
Humidity 5% RH to 95% RH, noncondensing
Fire
resistance
compliance
UL60950-1, EN60950-1, IEC60950-1, GB4943
Table 11 Technical specifications for non-PoE switch models (2)
Item S5560X-34S-EI S5560X-54S-EI
Dimensions (H × W × D)
43.6 × 440 × 260 mm (1.72 × 17.32 ×
10.24 in)
43.6 × 440 × 260 mm (1.72 × 17.32
× 10.24 in)
Weight ≤ 3.6 kg (7.94 lb) ≤ 3.9 kg (8.60 lb)
Console port
• 1 × micro USB console port
• 1 × serial console port
Only the micro USB console port is available when you connect both ports.
USB port 1 1
Management Ethernet port 1 1
QSFP+ port 2 2
SFP+ port 4 4
SFP port
4 (Each and its corresponding
10/100/1000BASE-T port form a
combo interface)
N/A
10/100/1000BASE-T
autosensing Ethernet port
28 48
Input voltage
• AC input:
{ Rated voltage range: 100 VAC to 240 VAC @ 50 Hz or 60 Hz
{ Max voltage range: 90 VAC to 264 VAC @ 47 Hz to 63 Hz
• DC input:
You can use a –48 VDC power source in the equipment room or an RPS
(RPS800-A or RPS1600-A).
{ Rated voltage range: –48 VDC to –60 VDC
{ Max voltage range: –36 VDC to –72 VDC
Minimum power
consumption
• AC: 19 W
• DC: 19 W
• AC: 22 W
• DC: 22 W
Maximum power
consumption
• AC: 56 W
• DC: 57 W
• AC: 66 W
• DC: 68 W
Chassis leakage current
compliance
UL60950-1, EN60950-1, IEC60950-1, GB4943
Melting current of power
module fuse
• AC: 3.15 A, 250 V
• DC: 8 A, 250 V
Operating temperature -5°C to 45°C (23°F to 113°F)
Humidity 5% RH to 95% RH, noncondensing
Fire resistance compliance UL60950-1, EN60950-1, IEC60950-1, GB4943
To Next Page
Loading...
