30
Figure 40 Serial console cable
Table 6 Serial console port signaling and pinout
RJ-45 Signal DB-9 Signal
1 RTS 8 CTS
2 DTR 6 DSR
3 TXD 2 RXD
4 SG 5 SG
5 SG 5 SG
6 RXD 3 TXD
7 DSR 4 DTR
8 CTS 7 RTS
To connect the switch to a configuration terminal (for example, a PC) through the serial console
cable:
1. Plug the DB-9 female connector of the serial console cable to the serial port of the PC.
2. Connect the RJ-45 connector to the serial console port of the switch.
Connecting the micro USB console cable
A micro USB console cable has a micro USB Type B connector at one end to connect to the micro
USB console port of the switch, and a standard USB Type A connector at the other end to connect to
the USB port on the PC.
To connect to the PC through the micro USB console cable:
1. Connect the standard USB Type A connector to the USB port of the PC.
2. Connect the micro USB Type B connector to the micro USB console port of the switch.
3. Click the following link, or copy it to the address bar on the browser to log in to download page
of the USB console driver, and download the driver.
http://www.h3c.com.hk/Technical_Support___Do
cuments/Software_Download/Other_Product
/USB_Console/USB_Console/
4. Select a driver program according to the operating system you use:
{ XR21V1410_XR21B1411_Windows_Ver1840_x86_Installer.EXE—32-bit operating
system.
{ XR21V1410_XR21B1411_Windows_Ver1840_x64_Installer.EXE—64-bit operating
system.
5. Click Next on the installation wizard.
Main label
1
8
B side
B
Pin 9
Pin 1
A side
A
To Next Page
Loading...
Need help?
General