350 96-8000
ADVANCED EDITOR
June 1999
The UNDO key is used to deactivate the pull-down menu system. Pressing RESET will also deactivate the
pull-down menu, but UNDO is preferred. If UNDO is pressed after invoking an executing function from a pull-
down menu, it will abort that function. A context-sensitive help session can also be ended by pressing the
UNDO key. This will return the user to the active program.
The EDIT key can be used to îš“switchîš” between two programs that have been selected to edit.
Pressing the F4 key will open a copy of the current program in the inactive window. The user can quickly edit
two different locations in the same program by pressing F4, moving to the second location, and then using the
EDIT key to move back and forth between the two locations. If the user enters îš‘Onnnnîš’ and then presses F4,
program Onnnn is opened in the inactive window.
Figure 11-7 illustrates the layout of the advanced editor.
Figure 11-7. The advanced editor screen layout.
To Next Page
Loading...
Need help?
General
