90 6LE008146B
Measurement functions
6.7 Measuring averaged values over an interval
Synchro
t
t
Synchronised integration interval
The duration of interval T can be configured at between 1 and 60 minutes in increments of
1 minute.
Synchronised integration interval
When the first synchronisation pulse is received, a first averaged value calculation is initialised.
For each new pulse, the integration in progress is stopped and the averaged value available is
updated. At the same time, a new calculation is initialised.
The time interval between two synchronisation pulses must be between 1 and 60 minutes. If
the interval exceeds 60 minutes, integration of the measurement stops and the measurements
up to the next synchronisation pulse are not taken into account.
To Next Page
Loading...
