Wireless Access Point HNW300APN
User Manual 18
6. Select the Protocol mode Fixed IP, DHCP client or PPPoE Mode and enter related parameters that
your ISP (Internet Services Provider) or Network Administrator provided and then click “Wireless
Configuration“.
7. Please enter the “ESSID” if you want to change the default settings (Network= Enable, ESSID =
Hamlet).
8. Choose the Encryption type if necessary, as Off – No Encryption (Default) / 64 Bit Encryption /
128 Bit Encryption / Wi-Fi Protected Access (TKIP) / Wi-Fi Protected Access2 (AES-CCMP) and
WPA Mixed Mode. For example, you choose the WPA Mixed Mode type and configure
Passphrase.
9. Please click “Submit” button to continue.
To Next Page
Loading...