Hamlet 300 User Manual

Wireless Access Point HNW300APN
User Manual 99
6. If the device PBC and the WPS handshake are successfully done on the station side, User’s Wi-Fi
Protected status will be shown as below.
7. If the device PIN is correct and the WPS handshake is successfully done, AP’s Wi-Fi Protected Setup
page will be shown as below.
Other pages such as Wireless Basic Settings page and Wireless Security Setup page will also be
updated appropriately as described in previous sections. In this case, AP is in un-configured state
before the station initiates the WPS handshake. According to the WPS spec, AP will create a wireless
profile with WPA2-mixed mode and a random-generated key upon successfully doing the WPS
handshake. However, AP will use the original wireless profile and give it to the station if AP is already in
configured state. That means all settings of AP will not change. Hence, all WPS related pages keep the
same.

Hamlet 300 Specifications

General

Brand	Hamlet
Model	300
Category	Wireless Access Point
Language	English